Set up a backend bucket

Cloud CDN leverages your choice of either the global external Application Load Balancer or the classic Application Load Balancer to provide routing, health checking, and anycast IP support. Because global external Application Load Balancers can have multiple backend instance types— Compute Engine VM instances, Google Kubernetes Engine Pods, Cloud Storage buckets, or external backends outside of Google Cloud—you can choose which backends (origins) to enable Cloud CDN for.

This setup guide shows you how to create an external Application Load Balancer with Cloud CDN enabled. The example uses the following resources:

  • The default Virtual Private Cloud (VPC) network
  • A default URL map
  • A reserved external IP address
  • A Cloud Storage bucket as the backend
  • A single load balancer backend bucket that acts as a wrapper around the Cloud Storage bucket

A backend bucket supports the following:

  • Cloud Storage buckets of any storage class, including multi-region buckets
  • Cloud CDN policies for caching content at Google's global edge

To learn how Cloud CDN works, see the Cloud CDN overview.

By default, Cloud Storage uses the same cache that Cloud CDN uses. If you enable Cloud CDN on the backend bucket, you can use Cloud CDN controls on your content. Cloud CDN controls include, for example, cache modes, signed URLs, and invalidation. Cloud CDN also lets you cache large content (> 10 MB). If you don't enable Cloud CDN on your backend bucket, you can only use origin Cache-Control headers to control caching for smaller content, as set by the Cloud Storage metadata.

Load balancer backends

An external Application Load Balancer uses a URL map to direct traffic from specified URLs to specified services. The following table summarizes the types of backends where you can host content and services.

Load balancer backend configuration Typical media type Backend types
Backend service Dynamic (such as data)
  • Unmanaged instance groups
  • Managed instance groups
  • Network endpoint groups internal to Google Cloud
  • Network endpoint groups external to Google Cloud
Backend bucket Static (such as images)
  • Cloud Storage buckets (discussed on this page)

Before you begin

Console

  1. In the Google Cloud console, go to the Home page.

    Go to the Google Cloud home page

  2. To the right of Google Cloud, select a project from the pull-down menu.

gcloud

     gcloud config set project PROJECT_ID
   

Replace PROJECT_ID with your Google Cloud project ID.

Terraform

    export GOOGLE_CLOUD_PROJECT=PROJECT_ID
   

Create a Cloud Storage bucket

If you have an existing Cloud Storage bucket that isn't already assigned to a load balancer, you can skip to the next step.

When you create a Cloud Storage bucket to use as the backend for an external Application Load Balancer with Cloud CDN, we recommend that you choose a multi-region bucket, which automatically replicates objects across multiple Google Cloud regions. This can improve the availability of your content and improve failure tolerance across your application.

Console

  1. In the Google Cloud console, open the Cloud Storage Buckets page.

    Open the Buckets page

  2. Click Create bucket.
  3. Specify values for the fields in the following table, leaving all others at their defaults.

    Property Value (type the value or select an option as specified)
    Name For each bucket, enter a globally unique name. If the name you enter is not unique, you see a message to try another name.
    Location type Multi-region
    Location Select a region, such as us (multiple regions in United States).
    Default storage class Standard
    Access control Uniform
  4. Click Create.

  5. Note the name of the newly created Cloud Storage bucket for the next step.

gcloud

gcloud storage buckets create gs://BUCKET_NAME --project=PROJECT_ID --default-storage-class=standard --location=us-east1 --uniform-bucket-level-access

Terraform

To create a bucket, use the google_storage_bucket resource.

# Cloud Storage bucket
resource "random_id" "bucket_prefix" {
  byte_length = 8
}

resource "google_storage_bucket" "default" {
  name                        = "${random_id.bucket_prefix.hex}-my-bucket"
  location                    = "us-east1"
  uniform_bucket_level_access = true
  storage_class               = "STANDARD"
  // delete bucket and contents on destroy.
  force_destroy = true
  // Assign specialty files
  website {
    main_page_suffix = "index.html"
    not_found_page   = "404.html"
  }
}

To learn how to apply or remove a Terraform configuration, see Basic Terraform commands.

Copy a graphic file into your Cloud Storage bucket

To enable you to test the setup, copy a graphic file from a public Cloud Storage bucket to your own Cloud Storage bucket.

gcloud

Run the following command in Cloud Shell. Replace BUCKET_NAME with your unique Cloud Storage bucket name:

gcloud storage cp gs://gcp-external-http-lb-with-bucket/three-cats.jpg gs://BUCKET_NAME/never-fetch/

Terraform

To copy the object, use the local-exec Provisioner with the gcloud storage cp command.

resource "null_resource" "upload_image" {
  provisioner "local-exec" {
    command = "gcloud storage cp gs://gcp-external-http-lb-with-bucket/three-cats.jpg gs://${google_storage_bucket.default.name}/never-fetch/ --recursive"
  }
}

Alternatively, to upload an object, use the google_storage_bucket_object resource.

# image object for testing, try to access http://<your_lb_ip_address>/test.jpg
resource "google_storage_bucket_object" "test_image" {
  name = "test-object"
  # Uncomment and add valid path to an object.
  #  source       = "/path/to/an/object"
  #  content_type = "image/jpeg"

  # Delete after uncommenting above source and content_type attributes
  content      = "Data as string to be uploaded"
  content_type = "text/plain"

  bucket = google_storage_bucket.default.name
}

To learn how to apply or remove a Terraform configuration, see Basic Terraform commands.

In the Google Cloud console, click Refresh to verify that the graphic file is copied.

Make your Cloud Storage bucket public

This example makes your Cloud Storage bucket publicly readable. This is the recommended approach for public content. With this setting, anyone on the internet can view and list your objects and their metadata, excluding ACLs. To reduce the risk of unintended data exposure, you should typically dedicate specific Cloud Storage buckets for public objects.

The following are alternatives to making an entire Cloud Storage bucket public:

The following procedure grants all users access to view objects in your Cloud Storage bucket, making the bucket publicly readable.

Console

  1. In the Google Cloud console, open the Cloud Storage Buckets page.

    Open the Buckets page

  2. Navigate to the bucket and click the Permissions tab.
  3. Click Add principals.
  4. In New principals, enter allUsers.
  5. For the role, select Cloud Storage > Storage Object Viewer.
  6. Click Save.

gcloud

gcloud storage buckets add-iam-policy-binding gs://BUCKET_NAME --member=allUsers --role=roles/storage.objectViewer

Terraform

To make your Cloud Storage bucket public, use the google_storage_bucket_iam_member resource.

# make bucket public
resource "google_storage_bucket_iam_member" "default" {
  bucket = google_storage_bucket.default.name
  role   = "roles/storage.objectViewer"
  member = "allUsers"
}

To learn how to apply or remove a Terraform configuration, see Basic Terraform commands.

Reserve an external IP address

Now that your Cloud Storage bucket is up and running, set up a global static external IP address that your customers use to reach your load balancer.

This step is optional, but recommended, because a static external IP address provides a single address to point your domain at.

Console

  1. In the Google Cloud console, go to the External IP addresses page.

    Go to the External IP addresses page

  2. To reserve an IPv4 address, click Reserve static address.
  3. Assign a Name of example-ip.
  4. Set the Network Service Tier to Premium.
  5. Set the IP version to IPv4.
  6. Set the Type to Global.
  7. Click Reserve.

gcloud

gcloud compute addresses create example-ip \
    --network-tier=PREMIUM \
    --ip-version=IPV4 \
    --global

Note the IPv4 address that was reserved:

gcloud compute addresses describe example-ip \
    --format="get(address)" \
    --global

Terraform

To reserve an IP address, use the google_compute_global_address resource.

# reserve IP address
resource "google_compute_global_address" "default" {
  name = "example-ip"
}

To learn how to apply or remove a Terraform configuration, see Basic Terraform commands.

Create the external Application Load Balancer

In this procedure, you create the load balancer's backend bucket, which serves as a wrapper for your Cloud Storage bucket. When creating or editing a backend bucket, you can enable Cloud CDN.

Console

Start the external Application Load Balancer configuration process

  1. In the Google Cloud console, go to the Load balancing page.

    Go to the Load balancing page

  2. Under HTTP(S) load balancing, click Start configuration.
  3. Select From Internet to my VMs, and then click Continue.
  4. Under Advanced traffic management, select one of the following:
    • For classic Application Load Balancers, select Classic HTTP(S) Load Balancer.
    • For global external Application Load Balancers, select HTTP(S) Load Balancer with Advanced Traffic Management.
  5. Set Name to http-lb, and then go to the next step.

Configure the backend and enable Cloud CDN

Create the load balancer's backend bucket, which serves as a wrapper for your Cloud Storage bucket. When creating or editing a backend bucket, you can enable Cloud CDN.

  1. Click Backend configuration.
  2. Under Backend services & backend buckets, click Create or select backend services & backend buckets, and then click Backend buckets > Create a backend bucket.
  3. Set the Name to cat-backend-bucket. This name doesn't need to be globally unique and can be different from the name of the actual Cloud Storage bucket.
  4. Under Cloud Storage bucket, click Browse.
  5. Select the Cloud Storage globally unique BUCKET_NAME that you created, and then click Select.
  6. Click Enable Cloud CDN.

  7. (Optional) Modify the cache mode and TTL settings.

  8. Click Create.

Configure host rules and path matchers

Host rules and path matchers are configuration components of an external Application Load Balancer's URL map.

In Host and path rules, you can retain the default settings.

For a customized setup example, see Adding backend buckets to load balancers.

To learn more about host rules and path matchers, see URL maps overview.

Configure the frontend

  1. Click Frontend configuration.
  2. Verify that the options are configured with these values.

    Property Value (type a value or select an option as specified)
    Protocol HTTP
    Network Service Tier Premium
    IP version IPv4
    IP address example-ip
    Port 80

    If you want to create an HTTPS load balancer instead of an HTTP load balancer, you must have an SSL certificate (gcloud compute ssl-certificates list), and you must fill in the fields as follows.

    Property Value (type a value or select an option as specified)
    Protocol HTTPS
    Network Service Tier Premium
    IP version IPv4
    IP address example-ip
    Port 443
    Certificate Select a certificate or Create a new certificate
  3. Click Done.

Review the configuration

  1. Click Review and finalize.
  2. Review the Backend buckets, Host and path rules, and Frontend sections.
  3. Click Create.
  4. Wait for the load balancer to be created.
  5. Click the name of the load balancer (http-lb).
  6. Note the IP address of the load balancer for the next task. It's referred to as IP_ADDRESS.

gcloud

Configure the backend

gcloud compute backend-buckets create cat-backend-bucket \
    --gcs-bucket-name=BUCKET_NAME \
    --enable-cdn \
    --cache-mode=CACHE_MODE

Set the cache mode by replacing CACHE_MODE with one of the following:

  • CACHE_ALL_STATIC or USE_ORIGIN_HEADERS: Uses the headers set according to cache control metadata in Cloud Storage. Cloud Storage always provides a Cache-Control header to Cloud CDN. If no value is explicitly chosen, it sends a default value.

  • FORCE_CACHE_ALL: Caches all content, ignoring any private, no-store, or no-cache directives in Cache-Control response headers sent by Cloud Storage.

Configure the URL map

gcloud compute url-maps create http-lb \
    --default-backend-bucket=cat-backend-bucket

Configure the target proxy

gcloud compute target-http-proxies create http-lb-proxy \
    --url-map=http-lb

Configure the forwarding rule

  • For a global external Application Load Balancer, use the gcloud CLI command with load-balancing-scheme=EXTERNAL_MANAGED. This setting offers advanced traffic management capability.
  • For an classic Application Load Balancer, use load-balancing-scheme=EXTERNAL.
gcloud compute forwarding-rules create http-lb-forwarding-rule \
    --load-balancing-scheme=LOAD_BALANCING_SCHEME \
    --network-tier=PREMIUM \
    --address=example-ip \
    --global \
    --target-http-proxy=http-lb-proxy \
    --ports=80

Terraform

Configure the backend

To configure the backend, use the google_compute_backend_bucket resource.

# backend bucket with CDN policy with default ttl settings
resource "google_compute_backend_bucket" "default" {
  name        = "cat-backend-bucket"
  description = "Contains beautiful images"
  bucket_name = google_storage_bucket.default.name
  enable_cdn  = true
  cdn_policy {
    cache_mode        = "CACHE_ALL_STATIC"
    client_ttl        = 3600
    default_ttl       = 3600
    max_ttl           = 86400
    negative_caching  = true
    serve_while_stale = 86400
  }
}

Configure the URL map

To configure the backend, use the google_compute_url_map resource.

# url map
resource "google_compute_url_map" "default" {
  name            = "http-lb"
  default_service = google_compute_backend_bucket.default.id
}

Configure the target proxy

To configure the target proxy, use the google_compute_target_http_proxy resource or the google_compute_target_https_proxy resource.

# http proxy
resource "google_compute_target_http_proxy" "default" {
  name    = "http-lb-proxy"
  url_map = google_compute_url_map.default.id
}

Configure the forwarding rule

To configure the forwarding rule, use the google_compute_global_forwarding_rule resource.

# forwarding rule
resource "google_compute_global_forwarding_rule" "default" {
  name                  = "http-lb-forwarding-rule"
  ip_protocol           = "TCP"
  load_balancing_scheme = "EXTERNAL"
  port_range            = "80"
  target                = google_compute_target_http_proxy.default.id
  ip_address            = google_compute_global_address.default.id
}
  • For a global external Application Load Balancer, use with load_balancing_scheme="EXTERNAL_MANAGED". This setting offers advanced traffic management capability.
  • For a classic Application Load Balancer, use load_balancing_scheme="EXTERNAL".

To learn how to apply or remove a Terraform configuration, see Basic Terraform commands.

Send traffic to your backend bucket

After creating the global forwarding rule, it can take several minutes for your configuration to propagate worldwide. After several minutes have passed, you can start sending traffic to the load balancer's IP address.

Console

  1. In the Google Cloud console, go to the Load balancing page.

    Go to the Load balancing page

  2. Click http-lb to expand the load balancer that you just created.

    In the Backend section, confirm that the backend bucket is healthy. There should be a green checkmark next to your backend bucket. If you see otherwise, first try reloading the page. It can take a few moments for the Google Cloud console to indicate that backends are healthy.

  3. After the Google Cloud console shows that the backend bucket is healthy, you can test your load balancer using a web browser by going to http://IP_ADDRESS/never-fetch/three-cats.jpg. Replace IP_ADDRESS with the load balancer's IP address. Your browser should render a page with content showing the graphic file.

gcloud

Use the curl command to test the response from the URL. Replace IP_ADDRESS with the load balancer's IPv4 address.

Note the IPv4 address that was reserved:

gcloud compute addresses describe example-ip \
    --format="get(address)" \
    --global

Send a curl request:

curl http://IP_ADDRESS/never-fetch/three-cats.jpg

Verify that Cloud CDN is working

If you reload the http://IP_ADDRESS/never-fetch/three-cats.jpg page several times in quick succession, there should be several cache hits.

The following log entry shows a cache hit. You can view cache hits in the Google Cloud console by opening Logs Explorer and filtering by the forwarding rule name.

Open the Logs Explorer

Logs Explorer

{
    insertId: "1oek5rg3l3fxj7"
    jsonPayload: {
        @type: "type.googleapis.com/google.cloud.loadbalancing.type.LoadBalancerLogEntry"
        cacheId: "SFO-fbae48ad"
        statusDetails: "response_from_cache"
    }
    httpRequest: {
        requestMethod: "GET"
        requestUrl: "http://LOAD_BALANCER_IP_ADDRESS/never-fetch/three-cats.jpg"
        requestSize: "577"
        status: 254
        responseSize: "157"
        userAgent: "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_14_6) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/83.0.4103.61 Safari/537.36"
        remoteIp: "CLIENT_IP_ADDRESS"
        cacheHit: true
        cacheLookup: true
    }
    resource: {
        type: "http_load_balancer"
        labels: {
            zone: "global"
            url_map_name: "URL_MAP_NAME"
            forwarding_rule_name: "FORWARDING_RULE_NAME"
            target_proxy_name: "TARGET_PROXY_NAME"
            backend_service_name: ""
            project_id: "PROJECT_ID"
        }
    }
    timestamp: "2020-06-08T23:41:25.078651Z"
    severity: "INFO"
    logName: "projects/PROJECT_ID/logs/requests"
    trace: "projects/PROJECT_ID/traces/241d69833e64b3bf83fabac8c873d992"
    receiveTimestamp: "2020-06-08T23:41:25.588272510Z"
    spanId: "7b6537d3672e08e1"
}

Console

  1. In the Google Cloud console, go to the Load balancing page.

    Go to the Load balancing page

  2. Click http-lb to expand the load balancer that you just created.

    In the Backend section, confirm that the backend bucket is healthy. There should be a green checkmark next to your backend bucket. If you see otherwise, first try reloading the page. It can take a few moments for the Google Cloud console to indicate that backends are healthy.

  3. After the Google Cloud console shows that the backend bucket is healthy, you can test your load balancer using a web browser by going to http://IP_ADDRESS/never-fetch/three-cats.jpg. Replace IP_ADDRESS with the load balancer's IP address. Your browser should render a page with content showing the graphic file.

gcloud

Use the curl command to test the response from the URL. Replace IP_ADDRESS with the load balancer's IPv4 address.

Note the IPv4 address that was reserved:

gcloud compute addresses describe example-ip \
    --format="get(address)" \
    --global

Send a curl request:

curl -D- -o /dev/null /dev/null http://IP_ADDRESS/never-fetch/three-cats.jpg

Content is fetched from Cloud Storage, cached by Cloud CDN, and then validated and re-fetched when it expires or is otherwise evicted from the cache.

Content from cache has an Age header that is greater than zero.

Content that needs to be refreshed earlier than the TTL can be invalidated and re-fetched from Cloud Storage.

Disable Cloud CDN

Console

Disable Cloud CDN for a single backend bucket

  1. In the Google Cloud console, go to the Cloud CDN page.

    Go to the Cloud CDN page

  2. On the right side of the origin row, click Menu and then select Edit.
  3. Clear the checkboxes of any backend buckets that you want to stop from using Cloud CDN.
  4. Click Update.

Remove Cloud CDN for all backend buckets for an origin

  1. In the Google Cloud console, go to the Cloud CDN page.

    Go to the Cloud CDN page

  2. On the right side of the origin row, click Menu and then select Remove.
  3. To confirm, click Remove.

gcloud

gcloud compute backend-buckets update BACKEND_BUCKET_NAME \
    --no-enable-cdn

Disabling Cloud CDN does not invalidate or purge caches. If you turn Cloud CDN off and back on again, most or all of your cached content might still be cached. To prevent content from being used by the caches, you must invalidate that content.

What's next